Technical Information

Size

The size of this initial range is 100x100x6mm (4x4x.25inches). Tiles with the large motifs will have areas which maybe up to 4mm above the nominal 6mm base tile. They will retain a smooth softly curvaceous upper surface.

Cleaning

Our glass is easy to keep clean – wipe with warm water and detergent and polish with a dry soft cloth.
DO NOT USE ABRASIVE MATERIALS AND/OR HOT WATER.

Installation

The recommended system to glue the tiles is to use either a flexible tile glue or V60 neutral cure silicon sealant. A neutral cure silicon sealant can also be used as the grout. Ensure all cavities on the rear of the tile are filled with the bedding compound before laying.

These tiles should be installed from internal corners and should ideally not be placed closer than 50mm (2inches) from external corners.

These tiles must NOT be cut, nibbled or chipped to fit.

As with any handcrafted product, be aware there will be slight variations in tile sizes, pattern definition and colouration. However, all precautions are taken to minimise these.